1206i Digital RF Detector

$1,049.95

The iProtect 1206i is a best-in-class counter surveillance device. Unlike typical searching devices, it can detect modern ‘hidden’ bugs that use protocols such as Bluetooth and Wi-Fi at a long distance. Such bugs, especially Bluetooth types, are practically undetectable by common RF detectors due to their very low transmitted power and special type of modulation. The i Protect DD1206 uses a separate channel with a high, (2.4/5 GНz) frequency pre-selector to detect and locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated signal in order to identify which protocol has been detected. In addition the unit can detect all ‘classical’ bugs and inspect them for the presence of correlation by sending sound impulses as well as other digital transmissions at a standard distance (GSM, LTE, 3G, 4G, and 5Ghz, DECT, etc.) The DD1206 is a sophisticated handheld radio frequency detection device that incorporates the ability to detect nearly any type of wireless protocol including digital frequencies such as Wi-Fi and analog frequencies reaching up to 12Ghz in range. Making this detection device extremely successful at finding unwanted surveillance threats are the two different antennas users can deploy and the demodulation feature which enables the users to hear the sound signature of the frequency.

Availability: 1 in stock

Description

 Detects up to 12GHz The 1206i Digital RF Detector

The perfect tool in searching for digital and analog transmitters in the frequency ranges

Main antenna:  The 1206i Digital RF Detector has a wide coverage, 50MHz – 12GHz, particularly at lower frequencies. It has made it possible to increase the detection distance of a conventional VHF/UHF bug by 2-3 times, while maintaining perfect sensitivity at the higher bands (GSM, Wi-Fi, Bluetooth, etc.)

Anntena 2: 1.4-2.48 GHz and 4.9-5.875 GHz. This is the first time that an affordable  RF detector gets the microwave log-periodic directed antenna supplied in the standard set.  2-4 times longer distance to  all  sources  above  2GHz  (Wi-Fi 2.4GHz,  Wi-Fi 5GHz,  Bluetooth, Wi-Max, LTE High, etc.). The directionality provides easy pinpointing of a wireless source. Now you not only know that there is a Wi-Fi source, but can quickly pinpoint it.

Correlation function discovers FM-transmitters by the presence of sound is different than other detectors. This unit can produce a loop-back effect  A microphone transmitter will pick up the sound and transmit the beep. The demodulation display will pick up the transmission and flash simultaneously. Also, when the unit detects other transmission different sounds will come from the unit depending the type of transmission it detects.

  • Increased sensitivity to Bluetooth/Wi-Fi signals allows the operator to detect wireless sources at distance of 50 cm- 2 m
  • Detects GSM, LTE, Wi-Max Bluetooth, Wi-Fi 2.4GHz an Wi-Fi 5GHz and RF and wireless video cameras
  • 16-segment bar graph indicator providing a wide dynamic range
  • 3 modes: sound, vibration and mixed
  • 2 levels of sensitivity (attenuator)
  • Durable metallic body
  • Microprocessor controlled

Specs

  • Detects Bluetooth, Wi-Fi, DECT, GSM, and RF
  • Operation up to 20 hours
  • Power 2xAAA
  • Frequency range, Antenna #1: 50MHz – 12Ghz.
  • Indications: Active antenna, Low battery, Mode, Identification, Attenuator, Secondary demodulation
  • Antenna 2, GHz: 2.4 – 2.48
 /4.9 – 5.875
  • Dimensions: 3” L x 0.5” W x 5” H
  • Weight: 0lb 6oz

https://coolcatspygadgets.com/product/acdelco-aaa-battery/

Weight 1 lbs
Dimensions 5 × 7 × 4 in
Shopping Cart